Производитель:
_EMIC Corporation (Япония)
• Accelerometer
EMIC offers many kinds of accelerometers available for various vibration measurements. They are a ultra small light weight accelerometer for highly precise measurement, a special tri-axial accelerometer for simultaneously measuring a vibration in three orthogonal axes, a large output accelerometer for measuring an earthquake and a suitable accelerometer for measuring and analyzing a building structure.
| Model |
710-C |
703-B3 |
720-BW |
| Type |
Small/Light Weight |
Tri-axial |
Water-proof |
| Feature |
Vibration measurement and modal analysis on small object |
Simultaneous dynamic measurement in three orthogonal axes on small object |
Center hole type suited to narrow space. Water-proof against 1MPa. |
| Charge Sensitivity[pC/(m/s2)] |
0.2 ± 20% |
0.061 ± 20% |
1.33 ± 15% |
| Mounted Resonance |
Higher than 60kHz |
Higher than 35kHz |
Higher than 26kHz |
| Frequency Response[Hz] |
Up to 20k |
Up to 12k |
Up to 8k |
| Temperature Range[°C] |
-50 to +160 |
-50 to +160 |
-20 to +120 |
| Case Material |
Stainless(SUS303) |
Titanium |
Stainless(SUS303) |
| Mass[g] |
1.9 |
3.7 |
11 |
| Dimensions[mm] |
ø8 X 5.4 |
11W X 11D X 7H |
ø15 X 8 |
| Model |
731-B |
760-B |
541-DSH |
| Type |
General Purpose |
Large Output |
High Temperature |
| Feature |
Center hole type suited to attach to narrow space. Side connector for easily routing cable. |
Most suited to low acceleration measurement on building and structure. |
Most suited to measurement at high temperature such as combined environmental test. |
| Charge Sensitivity[pC/(m/s2)] |
3.67 ± 15% |
35 ± 15% |
5.10 ± 15% |
| Mounted Resonance |
Higher than 38kHz |
Higher than 13.5kHz |
Higher than 25kHz |
| Frequency Response[Hz] |
Up to 7k |
Up to 3.5k |
Up to 5k |
| Temperature Range[°C] |
-50 to +160 |
-20 to +120 |
Up to +250 |
| Case Material |
Titanium |
Stainless(SUS303) |
Stainless(SUS303) |
| Mass[g] |
13.5 |
98.6 |
35 |
| Dimensions[mm] |
ø17.5 X 9.8 |
24HEX X 30 |
14HEX X 29 |
|
In English
