NoiseKen ESS-2000AX Генератор электростатического разряда (IEC 61000-4-2)

Недоступно для заказа

NoiseKen ESS-2000AX Генератор электростатического разряда

GENERAL

The ESS-2000AX ESD Simulator generates highly consistent, repeatable ESD pulses up to 30kV in both contact and air discharge modes. Compliant with IEC61000-4-2 standard, the unit features a 5.7-inch display, a lightweight gun and optic serial interface.
A variety of capacitor and resistor units are available and are easily changeable within the gun. The fully- programmable, menu-driven simulator offers three trigger modes.

FEATURES

Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence
A 5.7-inch color LCD for easy setting and good visibility
Unique shape for the operator's easy access to the control and displays even when the unit is put on the floor level (ground plane)
Communications with PC through the optic serial interface
A wide variety of the dedicated options

SPECIFICATION

Output polarity Positive or negative
Output voltage 0.20kV~30.0kV ±5% (30.5kV max)
0.20kV~10.0kV: 0.01V step, 10.0kV~30.0kV:0.1V step
Discharge interval Normal mode: 0.05s~600.0s ±10%
Extra mode : 1.00s~600.0s ±10%
0.05s~9.99s: 0.01s step, 10s~600.0s: 0.1s step
No. of times of discharge 1~60,000 times preset on the counter or continuous
Discharge mode Air/contact discharge
Radiation level Normal/Extra mode
Trigger mode Gun trigger/main unit trigger/ external trigger
Operation
mode IEC standard Contact discharge: 2.0kV, 4.0kV, 6.0kV, 8.0kV
(4 voltages preset)
Air discharge: 2.0kV, 4.0kV, 8.0kV, 15.0kV (4 voltages preset)
Manual Contact/Air discharge: 0.20kV~30.0kV
Sweep (automatic voltage ramping) available
Up to 99 units (test settings) storable
Sequence Seamless run of the selected test sequence (made of any combination of 99 units in Manual mode)
No. of units per one test sequence: up to 30 units
No. of test sequences: up to 20
Warning lamp Lights up while the HV circuitry is on
Blinks while discharges are in progress
Discharge gun TC-815R
Charging resistance 10M ohm(53 M ohm for combination with TC-815R discharge gun)
AUX connector D-SUB15 pin, female connector
Warning lamp (optional) connection
Automatic ESD Eliminator (optional) connection
External interlock input
External trigger input
Optical communication connector Optic RS-232C for PC communication
Power supply 100~240V AC 50/60 Hz ±10%
Power consumption 75VA
Operating temperature and humidity +15~+35ºC, 25~75% (no condensation)
Character display English, Chinese, Korean, Japanese
Dimensions and weight 260 (W) X 230 (H) X 285 (D) mm (projection excluded)
Approx. 5.3 kg

Опции
Automatic ESD Eliminator 01-00013A

Connected to the ESS-2000AX simulator main unit, the Automatic ESD Eliminator automatically removes residual charges on the EUT. A control signal from the ESS-2000AX turns on the switch of the eliminator to drain away the residual charges to the ground.

Two operation modes are provided: turn-on after each discharge and turn-on after preset number of discharges (Not compliant with the standard).

Gun holder 03-00056A

A gun holder that can be screwed to the left side of ESS-2000AX.

AUX connector junction box 05-00052A

Warning Lamp and Automatic ESD Eliminator options and external trigger circuit can be simultaneously connected

Optical USB module 07-00022A
Optical conversion adapter to be free from the EM interference when communicating with PC.
Optical RS232 module 07-00017A
Optical conversion adapter to be free from the EM interference when communicating with PC

Warning lamp 11-00014A