OPTEX FA J3 Фотоэлектрические оптические датчики серии J3, защита по IP67, обучаемый сенсор маркировок, узкий луч 1.5 мм

· J3M Mark sensor with Pushbutton Teach.
· Narrow view optics project a 3.0 mm spot
(Retro-reflective type J3R-100).
· 1.5 mm projected spot for BGS types.
· Epoxy filled sensor housing provides protection against vibration.

Mark sensor type
(Sensing range : 10±2m)
·J3M-GH(S)01N/P
·J3M-GH(S)01CN/CP

Retro-reflective
Narrow view type
(Sensing range : 0.05-1m)
·J3R-H(S)100N/P
·J3R-H(S)100CN/CP BGS type
(Sensing range : 15-50mm)
·BGS-3JH(S)05N/P
·BGS-3JH(S)05CN/CP

(H)=Head-on (S)=Side on

Features (J3 Common)

IP67
In addition to vibration resistance, the epoxy filled housing results in an IP67 rating.

Fast Response 200 micro sec, 10±2mm sensing distance (Mark sensor J3M type)
A latest Green LED with physical composition of GlanN2.
It's best for mark sensing.

BGS-S/H15 : Built-in FGS function
The BGS-S15 and BGS-H15 sensors are able to operate as FGS (foreground suppression) sensors. The FGS function senses the surface of the conveyor and uses this as a reflector, the sensor will detect thin and/or flat objects positioned on the conveyor.
A standard diffuse reflective sensor could be used in this application but adjusting the sensitivity is sometimes difficult, the FGS function is easily adjusted and will operate in a manner similar to a retro-reflective sensor without the reflector.

One-push Teaching.
The built-in microcomputer provides a convenient means of setting the sensor.

There is also a remote Teach function that allows the sensor to be set remotely.