Hurricane-LX800. Одноплатный компьютер EPIC (PC/104+) c низким энергопотреблением на базе AMD Geode LX800, от -40°C до +85°C

Недоступно для заказа

Hurricane-LX800
EPIC SBC - AMD Geode™ LX800 - 500MHz

The Hurricane-LX800 is an EPIC standard formatted single-board computers using AMD’s powerful yet energy-efficient Geode™ LX800(at)0.9W processor, running at 500MHz. This module integrates all peripherals needed to build an embedded PC on a small 115 mm x 165 mm (4.5” x 6.5”) printed circuit board. Using a CS5536 I/O companion and a Super I/O chip, all the standard peripherals are already on board.
The Hurricane-LX800 uses only a mere 5,3 watts and can operate in the extended temperature range of –40°…+85°C without additional cooling. It is supplied with 5V only and supports ACPI, advanced and PCI power management.

Application areas for the Hurricane-LX800 are industrial automation, automotive, medical devices, and military.

The Hurricane-LX800 is an EPIC standard formatted single-board computers using AMD’s powerful yet energy-efficient Geode™ LX800(at)0.9W processor, running at 500MHz. This module integrates all peripherals needed to build an embedded PC on a small 115 mm x 165 mm (4.5” x 6.5”) printed circuit board. Using a CS5536 I/O companion and a Super I/O chip, all the standard peripherals are already on board.
The Hurricane-LX800 uses only a mere 5,3 watts and can operate in the extended temperature range of –40°…+85°C without additional cooling. It is supplied with 5V only and supports ACPI, advanced and PCI power management.

Application areas for the Hurricane-LX800 are industrial automation, automotive, medical devices, and military.

Hurricane-LX800: Technical Data
Board Format EPIC, 115 mm x 165 mm (4.5” x 6.5”)
Processor AMD Geode™ LX800
Speed 500 MHz
Core logic I/O companion: CS5536
Super I/O: ITE8712
RAM (max.) 1 GB DDR333-SODIMM
RAM clock 333 MHz
PCI Express Integrated inLX800
up to 254 MB video memory
Graphics High Definition Audio Controller supports
4 audio streams; 2 in, 2 out
• 1.8 V and 3.3 V I/O is supported
• Docking is supported
• Each stream can obtain up to 16 channels
CRT Analog VGA
1920 x 1440 pixel at 85 Hz max.
LVDS Single channel, 24 bits
1600 x 1200 pixel at 60 Hz max.
TFT 18 bits
1600 x 1200 pixel
USB 4 x USB 2.0
Ethernet 100/10 MBit Micrel KSZ8842 dual
port Ethernet switch
Serial 2 x RS232/RS422/RS485
IDE 1 x Ultra ATA100 (ATA6) port
Floppy Up to 2.44 MB
uDOC 10 pin header for USB 2.0 Flash
Drives

Sound I/O AC97, 6-channel (5.1) audio with
3.5 mm connector
Digital I/O 29 general purpose I/O signals
Analog I/O 8 channels, 8 bit, 0...4.096V
High Speed
Input Port Raw 16 bit input with 300 Mb/s
isochronous capture
Video: VESA 1.1, 2.0 and BT.656 compliant.
Watchdog yes
Status LED HDD, power, standby
Operating
temperature -20°C … +60°C
-40°C … +85°C (optional)
ISA Bus PC/104, with full DMA capability
PCI Bus PC/104-Plus
MiniPCI, 3.3 V compliant
LPC Bus Available
Power Supply 10 pin mini-ATX power connector
5 V +/- 5 % All necessary voltages are
generated on-board.
Power Consumption 5.25 W typical
7 W maximum
Cooling Not required
MTBF >100.000 h (t.b.d.)
BIOS t.b.d.
Supported OS Windows XP, XP Embedded,
Windows CE, Linux, VxWorks