Sensoray 2426 многофункциональный модуль с цифровыми (24) и аналоговыми (6+1) входами и выходами, интерфейс Ethernet, -25 ~+85°C

Руководство (англ.), PDF
SDK и драйверы , ZIP

Specifications

Communication Interfaces

Network Physical layer 10BaseT, 100BaseTx Ethernet
Bit rate 10/100 Mbps, auto-detecting
Isolation 1500 Vrms
Protocols ARP, ICMP, IPv4, TCP, TELNET, HTTP
Configuration Programmable via HTTP (static ARP): IP address, netmask, gateway
HTTP Server Concurrent sessions 0 to 1
Functions Status, configuration, I/O monitor/control
TELNET Server Concurrent sessions 0 to 3
Time-out interval 5 minutes (default, reprogrammable via HTTP), programmable per session via shell
Async Serial COM Physical layer RS-422 or RS-485, shunt configurable
Bit rate 300 bps to 115.2 Kbps, software selectable
Termination (RS-422/485) 120 ohms ±5%, transmit and/or receive pair, enabled via shunts
Receiver turnaround 250 µs maximum
Telnet protocol options Com Port Control (RFC 2217), Binary Transmission (RFC 856)
Timestamp Generator Count rate 1.0 MHz
Resolution 32 bits, 1.0 µs

Analog Interfaces

Analog Inputs
Channels 6 external, 2 internal reference
Resolution 12 bits
Input type Differential
Differential input range -10V to +10V, minimum (at 0V CMV)
CMV input range -10V to +10V
Input impedance 22M ohms minimum
Conversion rate 1000 samples/s per channel
Inter-channel acquisition skew 125 µs maximum
Trigger Internal hardware timer
Data format Signed 16-bit integer with timestamp

Analog Output
Resolution 12 bits
Output range -10V to +10V, minimum
Settling time 500 µs maximum (20V step change)
Data format Signed 16-bit integer

Encoder Interface

Encoder Interface Resolution 32 bits
Count rate 0 to 30 MHz
Clock rate 0 to 7.5 MHz
Clock/Index input signals RS-422 differential, TTL/5VCMOS compatible, ±7V CMV maximum
Encoder power output 5VDC ±5%, 100mA maximum
Data format Signed 32-bit integer with timestamp

Digital Interfaces

Digital Inputs Channels 8
Input type Differential pair, optically isolated with 4.7 Kohm series impedance
Input range +5V to +24V

Digital Outputs Channels 16
Output type Active low, open collector drive with inductive load EMF suppression diode
Output high-level voltage source Internal, shunt selectable from continuous 24V or any interlock power source
Output current 100 mA maximum per channel, 500 mA maximum total

Power and Environmental

Module Power Input power 24VDC ±5% @120mA (digital outputs off, no external loads)
Interlock Power Channels 5
Voltage range +5VDC to +24VDC, referenced to module input power
Current 500mA maximum, per circuit
Temperature Operating range -25 to 85°C

Mechanical

Module Dimensions Outer dimensions 5.0H x 5.3W x 2.2D inches. W = DIN rail length. D = module height from DIN rail back panel; additional clearance required for field wiring.

Mating Connectors

(*) = included with module Ethernet RJ-45 plug, AMP 554169 or equivalent
Terminal block (*) Pluggable TB, Phoenix Contact 17.92.83.8 or equivalent
Serial COM DB-9 male, Norcomp 171-009-102-001 or equivalent
Encoder DB-9 female, Norcomp 171-009-202-001 or equivalent
Analog I/O DB-25 female, Norcomp 171-025-202-001 or equivalent
Digital inputs DB-37 female, Norcomp 171-037-202-001 or equivalent
Digital outputs DB-37 male, Norcomp 171-037-102-001 or equivalent